From sm655 at msstate.edu  Sun Dec  4 21:44:56 2011
From: sm655 at msstate.edu (SungKwang Mun)
Date: Mon Dec  5 08:41:04 2011
Subject: [ece3714] Lab test grade posted
Message-ID: <CACXHNcAm7PX-anX=e1LLR7RacpfDqWWAZG8EcLq9=kbQQJj+-A@mail.gmail.com>

Hello everyone,

The lab test grade is posted online. Please check the results. We
understand that the lab test might be difficult for you. The goal for
the lab test was to make sure you have a solid understanding of
digital circuit behavior and of the design process. For the lab, we
admit that there was not enough time to implement the FSM part,
especially on the breadboard. Considering this fact, I think all of
you who took the test did a good job regardless of the grade.

We decide to give you the points of the test as bonus, which means the
points will be added to the total points for the lab. We gave the
points according to the results on the paper and the performance on
the breadboard.

If you have any question about the grade, please let me know before
tomorrow if possible. I will be out of town from Monday.

Thank you for your hard work on Digital Device lab.

Sungkwang

ps. I sent this email several days ago, but it seems there is an error
on the mail server. I am sorry about it.
From sm655 at msstate.edu  Sun Dec  4 17:26:30 2011
From: sm655 at msstate.edu (Sungkwang Mun)
Date: Mon Dec  5 09:34:05 2011
Subject: [ece3714] Evaluation/Survey for Digital Device lab this semester
Message-ID: <4EDC01A6.2000009@msstate.edu>

Hello,

This semester we used a large classroom environment for the lab. We had 
used small lab room before the change. The change could bring some 
benefits, such as better deliverance of the lab content using projector 
and overhead camera. The change also brought some challenges that we 
should overcome. We would like to hear what you think for the lab so 
that we can provide a better lab environment.

If you have some time during this week, please take the anonymous survey 
through the link below. The questions are 10 simple yes/no questions.

http://www.surveymonkey.com/s/6WKJN83

Thank you for your participation,

Sungkwang
From sm655 at msstate.edu  Sat Dec  3 14:44:14 2011
From: sm655 at msstate.edu (Sungkwang Mun)
Date: Mon Dec  5 12:02:10 2011
Subject: [ece3714] Lab test grade posted
Message-ID: <4EDA8A1E.4080902@msstate.edu>

Hello everyone,

The lab test grade is posted online. Please check the results. We 
understand that the lab test might be difficult for you. The goal for 
the lab test was to make sure you have a solid understanding of digital 
circuit behavior and of the design process. For the lab, we admit that 
there was not enough time to implement the FSM part, especially on the 
breadboard. Considering this fact, I think all of you who took the test 
did a good job regardless of the grade.

We decide to give you the points of the test as bonus, which means the 
points will be added to the total points for the lab. We gave the points 
according to the results on the paper and the performance on the 
breadboard.

If you have any question about the grade, please let me know before 
tomorrow if possible. I will be out of town from Monday.

Thank you for your hard work on Digital Device lab.

Sungkwang